EN 136 Full Face Masks and Backpacks
Strap burning test all-in-one machine GBT16556-2007
Application
Firefighters' fire-fighting protective clothing is mainly composed of jackets and overalls, and can also wear fire-fighting protective helmets, fire-fighting protective boots, and fire-fighting protective gloves! Each set must be equipped with a strong inspection mark uniformly numbered by the National Fire Equipment Quality Inspection Center before leaving the factory.
Standard:
EN 136: Respiratory Protective Devices Full Face Masks Requirements, Testing, Marking
GBT16556-2007 5.11.2 / 5.11.3 GA124-2013 new version of the standard requirements
EN 14387
Common part
1. The box body is treated with spray paint, which is beautiful and elegant;
2. The integrated structure design of the full face mask and the back strap burning device on the same platform;
3. All tooling is made of stainless steel, beautiful and corrosion-resistant;
4. Inlet flow control valve to control gas flow; flame height control 40mm±2mm;
5. Imported brand pressure gauge and pressure regulating valve
6. The inlet needle valve can control the airflow rate supplying the burner;
7. PLC plus touch screen intelligent control system; the test interface is simple and easy to operate;
8. The system automatically and automatically time, and the heat data is automatically recorded and stored;
9. Independent storage of various test reports; free retrieval;
Full face mask test section
1. Burning test metal head mold; the head mold can be automatically rotated to the test position;
2. Six imported combustion nozzles, which can control the flow of propane and air
3. The height of the burner nozzle can be adjusted up and down; 250mm from the outer surface of the sample
4. K-type thermocouple 250MM above the burner can measure whether the flame temperature reaches 950±50℃
5. The temperature of the center of the flame is 950℃±50℃; measured by precision thermocouple;
6. Imported brand pressure gauge and pressure regulating valve adjust the gas pressure supplied to the burner, the range is 0~10kPa
7. Rotary device with head mold;
8. The gas automatic blocking device can block the gas supply 5 seconds after the test starts
9. The temperature at 250mm from the center of the flame to the top of the burner is 950±50℃;
10. Automatic ignition, automatically extinguished after 5s ignition time;
Backpack Strap test section
1. Stainless steel shield; beautiful and corrosion-resistant;
2. Imported Bunsen burner; adjustable gas and air flow;
3. Blowtorch lifting device; stainless steel sample holder;
4. Automatic timing device;
5. The flame height is 40mm; the temperature at the flame 20mm is 800±50℃;
6. Automatic ignition, after the ignition time is 20s, the gas will be automatically cut off and extinguished;
Specification
1. Dimensions: 1,400(W) x 650(D) x 1,300(H)mm
2. Power supply: AC 220V, 50/60Hz, 15A;
3. weight: 80 kg
Product Tags:
|
|
EN 136 Full Face Masks and Backpacks Strap burning test all-in-one machine GBT16556-2007 Images
|
